2004honda Recon 250 Es

[Jerrid]

hey guys, me again.

Once i replace the battery, something else is wrong.

Everytime i put gas in it, it just pores itself into the air filter/airfilter box.

this is really agrivating me, it just floods itself, bad.

Ive waisted about 10 dollars in gas now, and is really annoying.

If someone, anyone, knows anything i could try, please let me know

Iv already took the carb apart and cleaned it out, made sure the needle inside the carb was in the right spot and everything.

anyone?

[Dogbyte]

If the needle is in the right spot that's a good start. The needle seat, or the float can be the problem too. I'm not farmiliar with the carb you are talking about but check to make sure the seat is amking a good seal, and be sure the float moves freely and it actually floats.

Let us know how you made out

Dave

[Jerrid]

after talking with someone at a near by store, hes thinking the float or needle is bad, and most likley isnt replacable.

I can order another carb for 50$ so ima do that, and put it in myself seeing as how they want 300 to do it

Thanks for the help though dog

[Jerrid]

After looking more into my quad.

THe gas isnt coming out of the carb, its coming from a line running to the bottom on the air filter box, as i put a picture of where its coming from.

It just really flows out of it, and i have no idea why,

Anyone?













Please, any help would be appreciated.

[Dogbyte]

The gas is going through the motor and coming up through the reburn tube! interesting. I would think the new carb would prevent the gas from pouring down the throat of the engine preventing the reburn from being so rich. The needle probably isn't seating and filling the carb so much it pours down the head into the crank case.

Don't run this machine! Until you fix that situation. Check the oil, is it filled with gas? that could be very bad if you got that machine running. If there is any gas in the oil, change it maybe a couple times, depending on how much gas got in there.

Let me know what you find?

Dog

[Jerrid1]

seeing as how my old user dont work, i guess ill post on this one.

i need the torque specs to put this motor back together.

I replaced all the top end gaskets, and the piston rings.

Please, someone, anyone, has to have the clymer manual and knows the torque specs.

ANy help would be appreciated!

[Jerrid1]

so i got everything back together, and rode it easy for about a hour, i meant EASY. shifting real early, not lettin it get too hott.

But, somehow, i blew a gasket,

Its burnin oil, pretty bad when you rev it.

Back to step 1 i go.

[Jerrid1]

anyone have the directions on changing the BACK brakes on this quad?

lol