Go Back   Allterrainriders.com > Quad, Dirtbike, and UTV Manufacturers > Polaris

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 05-02-2008, 07:55 AM
Junior Member
 
Join Date: May 2008
Posts: 2
Default

k i have a sportsman 800 efi with a gorila six inch lift i have the rear prop shaft and the super extreme outlaw clutch kit in it also have a dyno jet kit in it . i m having problems wih revving really high not being ble to use high and low gear to the full potential anyone know what i can do to get rid of this problem i have the dual exhaust snorkeled too if it afffects it at all im not sure. i have no power loss going through the mud thats for sure im ust revving more than i woulld think i should be anyone s help is much appreciated thanx.
__________________
Brez
Reply With Quote
  #2 (permalink)  
Old 05-05-2008, 04:51 PM
Senior Member
 
Join Date: Oct 2005
Location: NJ Sucks
Posts: 159
Default

I had simular problems like this with mine and it was due to a burnt drive belt. Once its slips, the belt gets a burn and the belt will slip. My engine was revving too high and would not go fast. I would start with replacing the belt and see if that makes a difference. Could be the strain of the lift kits and larger tires combined with mud bogging that caused this.
__________________
Size does matter!
Reply With Quote
  #3 (permalink)  
Old 05-13-2008, 05:22 AM
Junior Member
 
Join Date: May 2008
Posts: 2
Default

i have a brand new belt on there but maybe my belt deflection is not right.
__________________
Brez
Reply With Quote
Reply
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 04:20 PM.


Google Ads

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.3.0