I had a bad wheel bearing give me this type of a problem. Jack up the front of the machine and put it in 2WD spin each front tire and see if there is any kind of binding or noise in the bearings. If you find nothing unusual then spin the tires and mark the center line of the tire do both tires and then measure between the front and the back of the tires. You should be towed in 1/4 inch. Make sure that nothing is bent or broken first as the alignment rarely ever gets tweaked on these things you would have to run into a brick wall 
__________________
Greg Hamill
Pocono Mountain ATV club
"We who choose to surround ourselves
with lives even more temporary than our
own, live within a fragile circle;
easily and often breached.
Unable to accept its awful gaps,
we would still live no other way.
We cherish memory as the only
certain immortality, never fully
understanding the necessary plan."
-- Irving Townsend
|
Linear Mode
