[attachment=2551:attachment] I jus put a Dubach race slip on my 06 450 and b4 i jetted it its ran ok but bogged a little. so i jetted it with a GYTR jet kit used all the recomended jets and needle placement adjusted the pilot screw and adjusted the idle knob on the carb now it wont idle. its runs amazing when im riding it. i just have 2 give it gas 2 start it and keep a my thumb on the throttle 2 keep it from stalling. and as soon as the RPMs drop it stalls. i dont know what 2 do to fix this problem. does anyone know what 2 do.
what dose it do when i dies dose it flood?? the biggest thing i have ran into with my JUNK is the pilot screw not being set correctly.. try playing with the pilot screw and see what happens if you have the instructions just recheck your settings.. there are my thoughts.
__________________
Southern Born, Southern Bred, When I Die Im Southern Dead
I jus put a Dubach race slip on my 06 450 and b4 i jetted it its ran ok but bogged a little. so i jetted it with a GYTR jet kit used all the recomended jets and needle placement adjusted the pilot screw and adjusted the idle knob on the carb now it wont idle. its runs amazing when im riding it. i just have 2 give it gas 2 start it and keep a my thumb on the throttle 2 keep it from stalling. and as soon as the RPMs drop it stalls. i dont know what 2 do to fix this problem. does anyone know what 2 do. 
Linear Mode
