<div class='quotetop'>QUOTE (jajwarrior @ Apr 28 2006, 06:47 PM)
<{POST_SNAPBACK}></div>
Quote:
|
I have a 91 warrior with a rusted rear axle that is off the quad. How do you disassemble it so I can clean it up and replace the bearings in the hub?[/b]
|
i not totally sure but i have owned 2 yamahas (Banshee and a blaster) and the axle came out the same way on both of them..there should be 2 big nuts on the axles loosen and remove them take off the rotor or sporket for the chain(which ever is on the side with the nuts) remove the rear caliper(if it i on there)and the axle should slide out. if its rusted you might have to soak with wd40 or something... like i said before the 2 yamahas and this was how you removed the axles i think it is the same for a warrior.
Linear Mode
