Grease Fitting Gone!

[avc8130]

So I went to lube up my Banshee and noticed one of my Grease Fittings is broken off pretty flush with the A Arm. Any ideas how to get it out so I can screw a new one in?
Thanks,
ac

[MudHole]

<div class='quotetop'>QUOTE (avc8130 @ Apr 30 2006, 05:39 PM) <{POST_SNAPBACK}></div>

So I went to lube up my Banshee and noticed one of my Grease Fittings is broken off pretty flush with the A Arm. Any ideas how to get it out so I can screw a new one in?
Thanks,
ac[/b]

Easy outs are the only way unless you have a little bit sticking up then you can start taping it out with a hardened pin.

[avc8130]

<div class='quotetop'>QUOTE (MudHole @ Apr 30 2006, 06:14 PM) <{POST_SNAPBACK}></div>

<div class='quotetop'>QUOTE (avc8130 @ Apr 30 2006, 05:39 PM) <{POST_SNAPBACK}>

So I went to lube up my Banshee and noticed one of my Grease Fittings is broken off pretty flush with the A Arm. Any ideas how to get it out so I can screw a new one in?
Thanks,
ac[/b]

Easy outs are the only way unless you have a little bit sticking up then you can start taping it out with a hardened pin.
[/b][/quote]

Actually, I just grabbed a torx screwdriver and jammed it in. The rest turned right out. Anyone know what size these are so I can go buy some?
ac

[mark40]

take the piece that you have left with the threads on it . go to any auto parts store they will have it also maybe in a 45 or 90 degree angle type if that would make it easier to grease .i think this thread may belong in tech. questions section but what the heck do i know