Go Back   Allterrainriders.com > Repair Shop > Technical/Troubleshooting/Modification Questions

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 03-10-2004, 03:52 AM
ego ego is offline
Junior Member
 
Join Date: Mar 2004
Location: SW Washington State
Posts: 27
Default

Am looking for an inventive person who has built a pull-behind snow plow for a quad (using the existing 5/8" trailer tow).....Would be much easier than crawling under our Kodiak to bolt an expensive one in place. Any ideas? David?
Reply With Quote
  #2 (permalink)  
Old 03-10-2004, 12:09 PM
Senior Member
 
Join Date: Nov 2003
Location: Forks Township PA
Posts: 1,597
Send a message via Yahoo to cheeseburger
Default

I don't think it would work. Snow is pretty heavy. The quad uses its weight to keep the blade down and also uses its weight to help the engine push the blade (inertia) . When you tow, you lose the help of the weight of the quad. The blade would have to be really heavy or it would ride on top of the snow. Also, you would be matting down snow as you drove over it and the plow likely would not scrape it up unless it was heavy enough. If you are pulling a heavy plow, you are giving up horsepower to it. You are better off just buying a front mount plow and save the aggravation. There were some posts in the forums about plows around Dec 2003. You will find some good links to where to buy them cheaply and also how to mount easily.

:rider
__________________
Rubber side down.......
Reply With Quote
  #3 (permalink)  
Old 03-10-2004, 08:33 PM
Senior Member
 
Join Date: Sep 2003
Location: Bethlehem Twp, NJ
Posts: 8,260
Default

Yea, I just don't see pulling the snow happening. What would happen when you pull too much? It will go right over the blade and be like you never even plowed it. The one I got for the Rancher is 2 cotter pins to the bottom of the quad. That's it. Doesn't get much easier than that!
__________________
2003 Honda Rancher ES 4x4
25" Mud Lites on Type6 Alum Wheels, Warn 4-2-4, Front Disc brake conversion kit, Big Gun EVO Exhaust, jet kit, K & N filter

never leave a rider behind.......next time it could be you

Jesus is the ONLY way
Reply With Quote
  #4 (permalink)  
Old 03-10-2004, 11:06 PM
Member
 
Join Date: Mar 2004
Location: No place to ride Jackson NJ
Posts: 85
Default

pushing the snow will clear a the snow adding better tracksion. that is why we plow in the first place.
to pull the snow you first must drive over it. just my take on it.
__________________
no sense being stupid
if you aint going to show it
Reply With Quote
  #5 (permalink)  
Old 03-10-2004, 11:11 PM
ego ego is offline
Junior Member
 
Join Date: Mar 2004
Location: SW Washington State
Posts: 27
Default

Hey David......
Where did you get your snowplow? Brand? I have an old heavy metal cylinder cut in half length-way! I was thinking about welding framing to it and use it to pull behind........with the blade turned slightly the snow would slide off to the side (would have to use counter roping to keep the blade from wandering waaaaaaaaay off the side).......Up here in SW Washington State we don't get that much snow, but this past winter we got plenty and with nearly 100yds of driveway to get out to our 1/2mi private gravel road (which was passable thanks to neighbors driving on it) and the fact the only 4wd we own is the Kodiak, it took the car chained up to just get out of the driveway!! Do commercial push plows come with skids? Don't want to scrape all of our gravel up!!
Thanks for all your help!!!!
Ed
Reply With Quote
  #6 (permalink)  
Old 03-11-2004, 12:12 AM
Senior Member
 
Join Date: Sep 2003
Location: Bethlehem Twp, NJ
Posts: 8,260
Default

Ed I have a Cycle Country 52" plow with skids. Can't remember what I paid for it cause I got it when I bought the quad.
__________________
2003 Honda Rancher ES 4x4
25" Mud Lites on Type6 Alum Wheels, Warn 4-2-4, Front Disc brake conversion kit, Big Gun EVO Exhaust, jet kit, K & N filter

never leave a rider behind.......next time it could be you

Jesus is the ONLY way
Reply With Quote
Reply
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 02:48 AM.


Google Ads

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.3.0