Two years ago my KQ stalled when I'd turn the handlebars. Particularly when I turned them to the right. I found a wire that had insulation rubbed off. I crimped it, taped it up with electrical tape and everything worked out fine for 2 years.
Then it started happening again....
So I checked the same wire. It was fine. I could get it started but the second I'd turn the handlebars, it would die. Like something was grounding out or a connection is loose. I played around with different wires, pulling on them a little bit after I'd start it to try and narrow it down to one wire. The only one that seems suspect is the one that goes up inside the console and I think its the wire that connects to the Oil Temp Light.
The connection seems fine though and now I can't get it to start at all. Has anyone else had this same problem?
|
Linear Mode
