How Can I Add Lights To My Ozark?

[thelazerviking]

I have a suzuki ozark 250 and i have 2 55 watt lights that i want to add to it. I know how i could wire it straight from the battery or the fuse block, but i want it to turn on preferrably with the high beams. So I can switch between lows and high + 55w lights. Does the light power run straight through the key switch and the high/low switch or is there a relay? I don't know what the 3 or 4 modules are for in the back, maybe relays or resistors or something, i don't know.

I unplugged the left light connector and stuck the 55w light negative on the ground pin then i put the positive on one of the positives, i don't know which though but the other light got brighter when i did that (the 55w did not turn on). then i took it off and did it again and maybe they contacted or somethign, maybe not, but blew a 20 amp fuse

would i have to put a bigger fuse in or something with the addition of the lights or should it be alright?

does anyone know where i could get a wiring diagram for my quad? 2003 suzuki ozark 250

thanks a bunch
James

[MarGinJoey]

James, We tried running truck/car fog lights on a buddies Raptor, forget it, we killed his battery in 30 minutes flat..

Try this MOOSE kit.....<-Clicky

MGJ

[superchicken]

you will kill your stator...in order to run all those watts you would have to have a minimum of 110 watt output ,just for your two 55 watt lights,without adding your stockers witch are probably 35 watts apeice...so your up in the 180 range,and the stock outut is probably around 80..